PUR
PUR
Indentification Tags
Description: The PUR cable markers are made of a thermoplastic polyurethane material, which is a halogen free, flame retardant, hydrolysis and micro organism resistant material. The raw material fulfills UL94V-0. For identification of cables and wires, the markers are supplied on rolls for thermal transfer print.
Technical Data
Description: The PUR cable markers are made of a thermoplastic polyurethane material, which is a halogen free, flame retardant, hydrolysis and micro organism resistant material. The raw material fulfills UL94V-0. For identification of cables and wires, the markers are supplied on rolls for thermal transfer print.
Use: Markers can be easily removed from the carrier, and applied to cables and wire bundles using cable dies. Thermal transfer printer and WO-80500BK ribbon are recommended for meeting printing performance requirements of SAE AS 81531 and MIL-STD-202F.
Specification and size
| Order Code | Color | Pack size（pcs/coil） | Marker heigh（mm） | Marker length（mm） |
|---|---|---|---|---|
| PUR-M-4H-10-60-1.0K-W | White | 1000 | 10 | 60 |
| PUR-M-4H-15-75-1.0K-W | White | 1000 | 15 | 75 |
| PUR-M-4H-25-75-0.5K-W | White | 500 | 25 | 75 |
| PUR-M-4H-10-60-1.0K-BL | Black | 1000 | 10 | 60 |
| PUR-M-4H-15-75-1.0K-BL | Black | 1000 | 15 | 75 |
| PUR-M-4H-25-75-0.5K-BL | Black | 500 | 25 | 75 |
| PUR-M-4H-10-60-1.0K-Y | Yellow | 1000 | 10 | 60 |
| PUR-M-4H-15-75-1.0K-Y | Yellow | 1000 | 15 | 75 |
| PUR-M-4H-25-75-0.5K-Y | Yellow | 500 | 25 | 75 |
| PUR-M-4H-10-60-1.0K-R | Red | 1000 | 10 | 60 |
| PUR-M-4H-15-75-1.0K-R | Red | 1000 | 15 | 75 |
| PUR-M-4H-25-75-0.5K-R | Red | 500 | 25 | 75 |
Physic performance
| Properties | Test Method | Typical value |
|---|---|---|
| Hardness | DIN 53505 | 58 Shore D |
| Density | DIN 53475 | 1.27g/cm3 |
| Tensile strength | DIN 53504 | 30MPa |
| Ultimate elongation | DIN 53504 | 400% |
| Stress at 20% elongation | DIN 53504 | 13MPa |
| Stress at 100% elongation | DIN 53504 | 19MPa |
| Stress at 300% elongation | DIN 53504 | 33MPa |
| Tear Strength | DIN 53515 | 110N/mm |
| Abrasion Loss | DIN 53516 | 30 mm3 |
| Compression set at room temperature | DIN EN ISO 815 | 30% |
| Compression set at 70°C | DIN EN ISO 815 | 45% |
| Notched impact strength (Charpy) +23°C | DIN EN ISO 179 | 50 kj/m2 |
