RS-(2X)PET
RS-(2X)PET
– Polyester heat shrink tubing
PET heat shrink-tubing is made of extruded polyester, which has the characteristics of environmental protection, degradability, high impact resistance and high toughness, and is mainly used for the protection and identification of the outer layer of electronic components such as capacitors and inductors, batteries, etc.
Technical Data
Features:
- Shrink ratio: 2:1
- Initial shrink temperature: ≥+70°C
- Fully shrink temperature: ≥+125°C
- Operating temperature: -40°C to +130°C
- Low smoke, degradable and flexible
- Standard color: black, blue and other standard colors
Performance characteristics
| Property | Test Method | Typical Performance |
| Tensile strength N/m2 | ASTM D 2671 | ≥5.0X107 |
| Elongation at break (%) | ASTM D 2671 | ≥200 |
| Melting point °c | ISO 6351-1 | 240±10℃ |
| Volume resistivity Ω·cm | IEC 60093 | ≥1014 |
| Breakdown strength (kV/mm) | IEC 60243 | ≥80 |
| Water absorption% | ASTM-D570 | ＜2.0 |
Specification Table:
Dimensions
|
Size (mm) |
Fold diameter mm |
Thickness mm |
Longitudind shrinkage rtio % |
Lateral shrinkage% |
Straightness accuracy mm |
|
|
100℃30s Boiling water shrinkage |
180℃15min
Shrikage rate of over |
|||||
|
Φ4 |
7.1±0.2 |
0.08±0.02 |
48±5 |
8±3 | 12±4 | ≤7 |
| Φ5 | 9.0±0.2 | 0.08±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ6 | 10.6±0.2 | 0.08±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ7 | 12.5±0.2 | 0.08±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ8 | 13.9±0.2 | 0.10±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ9 | 15.5±0.2 | 0.10±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ10 | 16.9±0.3 | 0.10±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ12 | 20.4±0.3 | 0.10±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ13 | 21.7±0.3 | 0.10±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
|
Φ14 |
23.3±0.3 |
0.10±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ16 | 26.7±0.3 | 0.10±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ18 | 29.8±0.3 | 0.10±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ20 | 32.9±0.3 | 0.10±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ22 | 36.2±0.3 | 0.10±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ25 | 41.1±0.5 | 0.12±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ30 | 49.1±0.5 | 0.12±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ35 | 56.7±0.5 | 0.12±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ40 | 64.0±0.5 | 0.12±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
| Φ42 | 69.0±0.5 | 0.12±0.02 | 48±5 | 8±3 | 12±4 | ≤7 |
