SBRS-(3X, 4X) GF

SBRS-(3X, 4X) GF
Military Grade Dual Wall Adhesive Lined Polyolefin Heat Shrink Tubing
Adhesive lined heat shrink tubing ideal for applications where both exceptional flame retardancy and environmental sealing capabilities are required.
Technical Data
Adhesive lined heat shrink tubing ideal for applications where both exceptional flame retardancy and environmental sealing capabilities are required.

Features
- 3:1 & 4:1 shrink ratio
- Highly flame retardant
- Superior sealing against water, moisture, or other contaminants
- High shrink ratio allows for coverage of irregularly shaped connectors and components
- Continuous operating temperature: -55℃ to 135℃
- Fully shrink temperature: ≥125℃
- Meets MIL-DTL-23053/4
Technical Data
Property | Test Method | Standard | Typical Performance |
---|---|---|---|
Tensile Strength (MPa) | ASTM D2671 | ≥10.4 | 14.28 |
Elongation (%) | ASTM D2671 | ≥200 | 450.29 |
Tensile Strength after aging (MPa) | MIL-DTL-23053/4 | ≥8.4 | 10.82 |
Elongation after aging (%) | MIL-DTL-23053/4 | ≥100 | 390.27 |
Dielectric strength (kV/mm) | IEC 60243 | ≥15 | 17.5 |
Volume resistivity (Ω.cm) | IEC 60093 | ≥1X1014 | 2.5X1014 |
Adhesive
Property | Test Method | Standard |
---|---|---|
Water Absorption | ASTM D570 | <0.2% |
Softening Point (℃) | ASTM E28 | 95±5 |
Strength of Peeling (PE) | ASTM D1000 | 120N/25mm |
Strength of Peeling (AL) | ASTM D1000 | 80N/25mm |
Specification Table
DimensionsSBRS-(3X)GF
Size | ​ Expanded | After Recovery | Standard Package | |||
---|---|---|---|---|---|---|
Inch | mm |
InnER Diameter Min(mm) |
Inner Diameter Max(mm) |
Total Wall Thickness (mm) |
Adhesive Thickness (mm) |
Spool Length M/spool |
1/8 | 3.2 | 3.2 | 1.0 | 0.90±0.30 | 0.40±0.20 | 200 |
3/16 | 4.8 | 4.8 | 1.6 | 1.05±0.30 | 0.40±0.20 | 100 |
1/4 | 5.4 | 5.4 | 2.2 | 1.25±0.30 | 0.45±0.20 | 100 |
5/16 | 7.9 | 7.9 | 2.7 | 1.35±0.30 | 0.45±0.20 | 100 |
3/8 | 9.5 | 9.5 | 3.2 | 1.45±0.30 | 0.50±0.20 | 50 |
1/2 | 12.7 | 12.7 | 4.2 | 1.65±0.30 | 0.50±0.20 | 1.22 OR 25M/Roll |
5/8 | 15.0 | 15.0 | 5.2 | 1.80±0.30 | 0.55±0.30 | 1.22 OR 25M/Roll |
3/4 | 19.1 | 19.1 | 6.3 | 1.95±0.30 | 0.60±0.30 | 1.22 OR 25M/Roll |
1 | 25.4 | 25.4 | 8.5 | 2.00±0.40 | 0.60±0.30 | 1.22 OR 25M/Roll |
1-1/4 | 30 | 30 | 10.2 | 2.15±0.40 | 0.65±0.30 | 1.22 OR 25M/Roll |
1-1/2 | 39 | 39 | 13.5 | 2.45±0.40 | 0.75±0.30 | 1.22 OR 25M/Roll |
2 | 50 | 50 | 17.0 | 2.75±0.40 | 0.80±0.30 | 1.22 OR 25M/Roll |