SBRS-(3X) H
SBRS-(3X) H
Halogen Free Dual Wall Adhesive-Lined Polyolefin Heat Shrink Tubing
Adhesive lined heat shrink tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.
Technical Data
Adhesive lined heat shrink tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.
Features
- 3:1 shrink ratio
- Halogen free
- Super sealing against water, moisture, or other contaminants
- Continuous operating temperature: -45℃ to 125℃
- Fully shrink temperature: ≥125℃
Technical Data
| Property | Test Method | Standard | Typical Performance |
|---|---|---|---|
| Tensile strength (MPa) | ASTM D2671 | ≥10.4 | 11.56 |
| Elongation (%) | ASTM D2671 | ≥200 | 480.62 |
| Tensile strength after aging (MPa) | UL224 158℃X168hr | ≥7.3 | 10.58 |
| Elongation after aging (%) | UL224 158℃X168hr | ≥100 | 420.75 |
| Flammability | ASTM D2671B | Pass | Pass |
| Dielectric strength (kV/mm) | IEC 60243 | ≥15 | 18.36 |
| Volume resistivity (Ω.cm) | IEC 60093 | ≥1X1014 | 2.18X1014 |
Adhesive
| Property | Test Method | Standard |
|---|---|---|
| Water Absorption | ASTM D570 | ＜0.5 |
| Softening Point (℃) | ASTM E28 | 95±5 |
| Strength of peeling (PE) | ASTM D1000 | 120N/25mm |
| Strength of peeling (Al) | ASTM D1000 | 80N/25mm |
Specification Table
Dimensions| Size | Expanded |
After Recovery | Standard Package | |||
|
Inch |
mm |
Inner Diameter Min(mm) |
Inner Diameter Max(mm) |
Total Wall Thickness (mm) |
Adhesive Thickness (mm) |
Spool Length M/spool |
| 3/32 |
2.4 |
2.4 |
0.8 |
0.85±0.15 |
0.40±0.10 |
200 |
|
1/8 |
3.2 |
3.2 |
1.0 |
0.95±0.15 |
0.40±0.10 |
200 |
|
3/16 |
4.8 |
4.8 |
1.6 |
1.10±0.15 |
0.40±0.10 |
100 |
|
1/4 |
6.4 |
6.4 |
2.2 |
1.20±0.15 |
0.45±0.12 |
100 |
|
5/16 |
7.9 |
7.9 |
2.7 |
1.35±0.15 |
0.50±0.12 |
100 |
|
3/8 |
9.5 |
9.5 |
3.2 |
1.45±0.20 |
0.50±0.12 |
50 |
|
1/2 |
12.7 |
12.7 |
4.2 |
1.70±0.20 |
0.50±0.12 |
1.22 OR 25M/Roll |
|
5/8 |
15 |
15 |
5.2 |
1.80±0.20 |
0.55±0.15 |
1.22 OR 25M/Roll |
|
3/4 |
19.1 |
19.1 |
6.3 |
2.00±0.20 |
0.55±0.15 |
1.22 OR 25M/Roll |
|
1 |
25.4 |
25.4 |
8.5 |
2.10±0.25 |
0.55±0.15 |
1.22 OR 25M/Roll |
|
1-1/4 |
30 |
30 |
10.2 |
2.20±0.25 |
0.60±0.15 |
1.22 OR 25M/Roll |
|
1-1/2 |
39 |
39 |
13.5 |
2.40±0.25 |
0.60±0.15 |
1.22 OR 25M/Roll |
|
2 |
50 |
50 |
17 |
2.70±0.25 |
0.70±0.15 |
1.22 OR 25M/Roll |
|
5/2 |
64 |
64 |
21 |
3.00±0.30 |
0.70±0.15 |
1.22 OR 25M/Roll |
|
3 |
75 |
75 |
25 |
3.00±0.30 |
1.00±0.20 |
1.22 OR 25M/Roll |
|
7/2 |
90 |
90 |
30 |
3.00±0.30 |
1.00±0.20 |
1.22 OR 25M/Roll |
|
4 |
100 |
100 |
34 |
3.00±0.30 |
1.00±0.20 |
1.22 OR 25M/Roll |
|
5 |
125 |
125 |
42 |
3.00±0.30 |
1.00±0.20 |
1.22 OR 25M/Roll |
