SBRS-(3X)GLW

SBRS-(3X)GLW
Flexible, Thick Adhesive-Lined Dual Wall Heat Shrink Tubing
Flexible, Thick Adhesive-Lined Dual Wall Heat Shrink Tubing is manufactured by co-extrusion of polyolefin and hot-melt adhesive. Designed to provide both insulation and sealing for protected articles, Used to protect bundles wires and metal tubes against water and moisture.
Technical Data
Flexible, Thick Adhesive-Lined Dual Wall Heat Shrink Tubing is manufactured by co-extrusion of polyolefin and hot-melt adhesive. Designed to provide both insulation and sealing for protected articles, Used to protect bundles wires and metal tubes against water and moisture.

Features
- Thick adhesive liner bonding to a wide variety of plastics, rubber, and metals forms an effective barrier against fluids and moisture
- Flexible, shrinks quickly
- Continuous operating temperature: -45℃ to 125℃
- Min shrink temperature: 110℃
- Shrink ratio: 3:1
Technical Data
Property | Test Method | Standard | Typical Performance |
---|---|---|---|
Tensile Strength (MPa) | ASTM D2671 | ≥ 10.4 | 13.85 |
Elongation (%) | ASTM D2671 | ≥ 200 | 454.62 |
Tensile Strength after Aging (MPa) | UL224 158℃X168hr | ≥ 7.3 | 12.36 |
Elongation after Aging (%) | UL224 158℃X168hr | ≥ 100 | 392.54 |
Dielectric Strength (kV/mm) | IEC 60243 | ≥ 15 | 19.17 |
Volume Resistivity (Ω·cm) | IEC 60093 | ≥ 1X1014 | 1.98 X1014 |
Adhesive
Property | Test Method | Standard | Performance |
---|---|---|---|
Water Absorption | ASTM D570 | < 0.2% | |
Softening Point (℃) | ASTM E28 | 95±5 | |
Strength of Peeling (PE) | ASTM D1000 | 120N/25mm | |
Strength of Peeling (AL) | ASTM D1000 | 80N/25mm |
Specification Table
DimensionsSize | Expanded | After Recovery | Standard Package | |||
---|---|---|---|---|---|---|
Inch | mm | Inner Diameter Min(mm) | Inner Diameter Max(mm) | Total Wall Thickness (mm) | Adhesive Thickness (mm) | Spool Length M/spool |
1/ 8 | 3.2 | 3.2 | 1.0 | 0.90±0.30 | 0.45±0.20 | 200 |
3/16 | 4.8 | 4.8 | 1.6 | 1.20±0.30 | 0.55±0.20 | 100 |
1/ 4 | 6.4 | 6.4 | 2.2 | 1.25±0.30 | 0.55±0.20 | 100 |
5/16 | 7.9 | 7.9 | 2.7 | 1.35±0.30 | 0.65±0.20 | 100 |
3 /8 | 9.5 | 9.5 | 3.2 | 1.35±0.30 | 0.65±0.20 | 50 |
1 /2 | 12.7 | 12.7 | 4.2 | 1.55±0.40 | 0.75±0.20 | 1.22 OR 25M/Roll |
5 /8 | 15.0 | 15.0 | 5.2 | 1.65±0.40 | 0.75±0.20 | 1.22 OR 25M/Roll |
3 /4 | 19.1 | 19.1 | 6.3 | 1.90±0.40 | 0.85±0.20 | 1.22 OR 25M/Roll |
1 | 25.4 | 25.4 | 8.5 | 2.00±0.40 | 0.90±0.20 | 1.22 OR 25M/Roll |
5/4 | 30.0 | 30.0 | 10.2 | 2.05±0.40 | 0.90±0.20 | 1.22 OR 25M/Roll |
1-1/2 | 38.1 | 38.1 | 13.5 | 2.35±0.40 | 1.05±0.20 | 1.22 OR 25M/Roll |