SBRS-(3X)GM

SBRS-(3X)GM
High Sealing, Adhesive-Lined, Polyolefin Heat Shrink Tubing
It consists of a double layer of cross-linked polyolefin and polyamide PA. It has the characteristics of good flame retardancy and strong sealing, and is mainly used in various fields such as sealing, insulation, bundling, and fixation of wire harnesses and metal pipes that require sealing, waterproof, moisture-proof, and anti-corrosion.
Technical Data
It consists of a double layer of cross-linked polyolefin and polyamide PA. It has the characteristics of good flame retardancy and strong sealing, and is mainly used in various fields such as sealing, insulation, bundling, and fixation of wire harnesses and metal pipes that require sealing, waterproof, moisture-proof, and anti-corrosion.

Features
- 3:1 shrink ratio to cover varying splice configurations and substrate profiles
- Flame-retardant and strong sealing; the tubing provides strain relief and abrasion protection of wire splices, terminals, and other components
- Thick adhesive liner forms an effective barrier against fluids and moisture penetration
- Minimum shrink temperature: 70°C
- Continuous operating temperature: -45°C to 125°C
- Fully shrink temperature: 125℃
- Wear resistance and UV resistance
Technical Data
Property | Test Method | Standard |
---|---|---|
Tensile Strength (MPa) | ASTM D2671 | ≥10.4 |
Elongation (%) | ASTM D2671 | ≥200 |
Tensile Strength after aging (MPa) | ASTM D 2671 (158℃×168h) | ≥7.3 |
Elongation after aging (%) | ASTM D 2671 (158℃×168h) | ≥100 |
Dielectric strength (kV/mm) | IEC 60243 | ≥15 |
Volume resistivity (Ω·cm) | ASTM D876 | ≥1X1014 |
Adhesive
Property | Test Method | Standard |
---|---|---|
Water Absorption | ASTM D570 | <0.2% |
Softening Point (℃) | ASTM E28 | 95±5 |
Strength of Peeling (PE) | ASTM D 1000 | 120N/25mm |
Strength of Peeling (AL) | ASTM D 1000 | 80N/25mm |
Specification Table
DimensionsSize | Expanded | After Recovery | ||
mm |
Inner Diameter Min(mm) |
Inner Diameter Max(mm) |
Total Wall Thickness(mm) |
Adhesive Thickness(mm) |
Φ3.2 |
3.2 |
1.00 |
0.90±0.30 |
0.45±0.20 |
Φ4.8 |
4.8 |
1.60 |
1.20±0.30 |
0.65±0.30 |
Φ6.4 |
6.4 |
2.20 |
1.45±0.30 |
0.75±0.30 |
Φ7.9 |
7.9 |
2.70 |
1.55±0.30 |
0.80±0.30 |
Φ9.5 |
9.5 |
3.20 |
1.65±0.30 |
0.80±0.30 |
Φ12.7 |
12.7 |
4.20 |
1.70±0.30 |
0.80±0.30 |
Φ15.0 |
15.0 |
5.20 |
2.00±0.30 |
1.00±0.30 |
​Φ19.1 |
19.1 |
6.30 |
2.10±0.30 |
1.00±0.30 |
Φ25.4 | 25.4 | 8.50 | 2.20±0.40 | 1.00±0.30 |