SBRS-CAPS-NF
SBRS-CAPS-NF
Semi-rigid, Adhesive-Lined Insulating Caps
Semi-rigid, adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices under extreme operating conditions.
Technical Data
Semi-rigid, adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices under extreme operating conditions.
Features
- 4:1 shrink ratio allows fewer sizes to cover a wide range of profiles
- Seals and protects against water, moisture, and chemicals
- Adhesive bonds readily to PVC, XLPE, and PP-EPDM cable jackets
- Shrinks rapidly for quick installation
- Continuous operating temperature: -45℃ to 125℃
- Fully shrink temperature: 125℃
- Not flame-retardant
Technical Data
| Property | Test Method | Standard | Typical Performance |
|---|---|---|---|
| Tensile strength (MPa) | ASTM D2671 | ≥12 | |
| Elongation (%) | ASTM D2671 | ≥200 | |
| Tensile strength after aging (MPa) | UL224 158℃X168hr | ≥8.4 | |
| Elongation after aging (%) | UL224 158℃X168hr | ≥100 | |
| Dielectric strength (kV/mm) | IEC 60243 | ≥15 | |
| Volume resistivity (Ω.cm) | IEC 60093 | ≥1X1014 |
Adhesive
Specification Table
Dimensions| Code |
Size (mm) |
Standard Length (mm) |
Expanded | Recoverd |
|||
|
Inner Diameter Min(mm) |
Inner Diameter Max(mm) |
outer Lyer Thickness (mm) |
Adhesive Thickness (mm) |
Total Wall Thickness (mm) |
|||
| SBRS-CAPS-NF-1 | 3.2 | 22 | 3.2 | 0.80 | 0.64 | 0.56 | 1.20 |
| SBRS-CAPS-NF-2 | 4.8 | 25.4 | 4.8 | 1.30 | 0.76 | 0.76 | 1.52 |
| SBRS-CAPS-NF-3 | 6.4 | 28.4 | 6.4 | 1.52 | 1.00 | 0.91 | 19.1 |
| SBRS-CAPS-NF-4 | 9.5 | 31.8 | 9.5 | 2.00 | 1.08 | 1.00 | 2.08 |
| SBRS-CAPS-NF-5 | 12.7 | 38.1 | 12.7 | 2.41 | 1.30 | 1.24 | 2.54 |
