SBRS-CAPS-RL
SBRS-CAPS-RL
Semi-rigid, Adhesive-Lined Insulating Caps
Heat shrink end caps are a simple yet effective method for sealing cable ends, pipe, conduit or other similar objects. Typical Applications Watertight sealing of cable ends and pipe conduit Standards Rated for 600/1000V.
Technical Data
Heat shrink end caps are a simple yet effective method for sealing cable ends, pipe, conduit or other similar objects. Typical Applications Watertight sealing of cable ends and pipe conduit Standards Rated for 600/1000V.
Features
- 3:1 shrink ratio
- Resistant to common fluids and solvents
- Superior resistance to weathering, moisture contamination, and adverse environmental conditions
- Standard adhesive liner provides complete environmental protection and insulation
- Heat indicating lines
- Coated hot melt adhesive resists pull-off
- Fully shrink temperature: 125℃
- Continuous operating temperature: -55℃ to 110℃
Technical Data
| Property | Test Method | Standard | Typical Performance |
|---|---|---|---|
| Tensile strength (MPa) | ASTM D2671 | ≥12 | |
| Elongation (%) | ASTM D2671 | ≥300 | |
| Tensile strength after aging (MPa) | UL224 158℃X168hr | ≥7.3 | |
| Elongation after aging (%) | UL224 158℃X168hr | ≥200 | |
| Dielectric strength (kV/mm) | IEC 60243 | ≥15 | |
| Volume resistivity (Ω.cm) | IEC 60093 | ≥1X1014 |
Adhesive
| Property | Test Method | Standard | Typical Performance |
|---|---|---|---|
| Water Absorption | ASTM D570 | ≤0.2% | |
| Sofening Point (℃) | ASTM E28 | 95±5 | |
| Strength of peeling (PE) | ASTM D 1000 | 120N/25mm | |
| Strength of peeling (AL) | ASTM D 1000 | 80N/25mm |
Specification Table
Dimensions| Expanded Length (Nom) | Expanded | Recoverd | General Use Diameter | Cable Range | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Intertnal Diameter (Min) | Intertnal Diameter (Max)-d | Wall Thickness（Nom）-W | ||||||||
| mm | IN | mm | IN | mm | IN | mm | IN | mm | IN | AWG/MCM |
| 50.80 | 2.00 | 10.20 | 0.40 | 3.80 | 0.15 | 2.00 | 0.080 | 4.5-8.5 | 0.18-0.34 | #8-#1 |
| 63.50 | 2.50 | 19.10 | 0.75 | 5.60 | 0.22 | 2.00 | 0.080 | 6-16.5 | 0.24-0.65 | #2-4/0 |
| 76.20 | 3.00 | 27.90 | 1.10 | 10.20 | 0.40 | 2.40 | 0.095 | 11.5-25 | 0.45-1 | 2/0-500 |
| 76.20 | 3.00 | 33.00 | 1.30 | 10.20 | 0.40 | 2.40 | 0.095 | 11.5-30 | 0.45-1.2 | 300-1000 |
| 88.90 | 3.50 | 38.10 | 1.50 | 12.70 | 0.50 | 2.40 | 0.095 | 14-35 | 0.55-1.4 | 500-1500 |
| 88.90 | 3.50 | 43.20 | 1.70 | 12.70 | 0.50 | 2.50 | 0.100 | 14-40 | 0.55-1.6 | 650-1750 |
| 88.90 | 3.50 | 52.10 | 2.05 | 19.00 | 0.75 | 2.50 | 0.100 | 21-45 | 0.82-1.8 | 900-2500 |
| 101.60 | 4.00 | 69.80 | 2.75 | 25.40 | 1.00 | 2.50 | 0.100 | 30-63 | 1.2-2.5 | 2000-2500 |
| 114.30 | 4.50 | 88.90 | 3.50 | 30.00 | 1.18 | 2.50 | 0.100 | 33-83.8 | 1.3-3.3 | — |
| 139.70 | 5.50 | 119.40 | 4.70 | 39.90 | 1.57 | 2.70 | 0.105 | 40.6-114.3 | 1.6-4.5 | — |
