SBRS- CAPS
SBRS- CAPS
Adhesive-Lined Insulating Caps
Adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices in wiring harness and electronic assemblies.
Technical Data
Adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices in wiring harness and electronic assemblies.
Features
- 4:1 shrink ratio allows fewer sizes to cover a wide range of profiles
- Seals and protects against water, moisture, and chemicals
- Adhesive bonds readily to PVC, XLPE, and PP-EPDM cable jackets
- Shrinks rapidly for quick installation
- Continuous operating temperature: -45℃ to 125℃
- Minimum shrink temperature: 125℃
Technical Data
| Property | Test Method | Standard |
|---|---|---|
| Tensile Strength (MPa) | ASTM D2671 | ≥10.4 |
| Elongation (%) | ASTM D2671 | ≥200 |
| Tensile Strength after aging (MPa) | UL224 158℃X168hr | ≥7.3 |
| Elongation after aging (%) | UL224 158℃X168hr | ≥100 |
| Dielectric Strength (kV/mm) | IEC 60243 | ≥15 |
| Volume Resistivity (Ω.cm) | IEC 60093 | ≥1X1014 |
Adhesive
Specification Table
Dimensions| Code |
Size (mm) |
Standard Length(mm)
|
Expanded | Recoverd | ||
|
Inner Diameter Min(mm) |
Inner Diameter Max(mm) |
Adhesive Thickness (mm) |
Total Wall Thickness(mm) |
|||
|
SBRS-CAPS-1 |
5.75 |
4.00 |
5.75 |
1.27 |
0.56 |
1.70 |
|
SBRS-CAPS-2 |
7.40 |
5.80 |
7.44 |
1.65 |
0.76 |
2.00 |
| SBRS-CAPS-3 | 10.80 | 7.40 | 10.85 | 2.41 | 1.37 | 2.30 |
