WRSJX
WRSJX
Heat Shrink Right Angle/In-line Bushing Boot
Manufactured from polyolefin, inner coated with hot-melt adhesive at the ends. Excellent insulation, flame retardant, thermal stability, etc. Used to protect cable against flashover or surges induced in switchgear and transformer. Shaped components to meet a range of requirements.
Technical Data
| Property | Test Method | Standard Value |
| Tensile Strength | ASTM-D-638 | ≥10MPa |
| Elongation at Break | ASTM-D-638 | ≥300% |
| Tensile Strength Variation After Heat Aging（130℃x168h） | ASTM-D-5510 | ≤±20% |
| Elongation at Break Variation After Heat Aging（130℃x168h） | ASTM-D-5510 | ≤±20% |
| Volume Resistivity | IEC 60093 | ≥1x1014Ω.cm |
| Dielectric Strength | IEC 60243 | ≥25kV/mm |
Specification Table:
| Spec. | As Supplied/mm | After Recovered/mm | ||||
| D1 Min | D2 Min | D1 Max | D2 Max |
W (±10%) |
W2 (±10%) |
|
| Right Angle Boot | ||||||
|
WRSJX-R1 |
80 |
35 |
36 |
19 |
5.6 | 5.0 |
| WRSJX-R2 | 80 | 50 | 36 | 19 | 5.6 | 5.0 |
| WRSJX-R3 | 80 | 50 | 36 | 28 | 5.6 | 5.0 |
| WRSJX-R4 | 95 | 70 | 36 | 28 | 5.6 | 5.0 |
| WRSJX-R5 | 145 | 70 | 72 | 34 | 5.6 | 5.0 |
| In-line Bushing Boot | ||||||
|
WRSJX-S1 |
80 |
34 |
32 |
19 |
3.6 | 3.6 |
|
WRSJX-S2 |
80 | 58 | 32 | 19 | 3.6 | 3.6 |
| WRSJX-S3 | 140 | 90 | 68 | 34 | 3.6 | 3.6 |
