WRSZT6
WRSZT6
Heat Shrink 6-Core Breakout
Made of cross linked polyolefin to provide mechanical protection and strain relief. Inner coated with adhesive on the body and the fingers to form a durable watertight seal. To provide sealing protection over 6-core cable crutch, such as trailing cable, variable frequency drive cable, telecommunication cables, control cable, etc. Shrink temperature: start at 90℃,and fully recovered at 130℃.
Technical Data
| Property | Test Method | Standard Value |
| Tensile Strength | ASTM-D-638 | ≥12MPa |
| Elongation at Break | ASTM-D-638 | ≥300% |
| Volume Resistivity | IEC 60093 | ≥1x1013Ω.cm |
| Dielectric Strength | IEC 60243 | ≥15kV/mm |
| Brittle Temperature | ISO 974 | -40℃ |
| Heat Shock | 160℃，4h | No Crack |
| Water Absorption(23±2)℃ 24h | ISO 62 | ≤0.1% |
| Hardness（Shore A） | ISO 868 | ≥80 |
Specification Table:
| Cores | Spec. | As Supplied（mm） | After Recovered | |||||
|
Body Diameter (D) Min |
Big Finger Diameter (d1) Min |
Small Finger Diameter (d2) Min |
Full Length (L) (±5) |
Body Diameter (D) Max |
Big Finger Diameter (d1) Max |
Small Finger Diameter (d2) Max |
||
|
6-cores Breakout |
1# |
84 |
30 | 20 | 215 | 41 | 11 | 8 |
| 2# | 132 | 55 | 31 | 215 | 53 | 16 | 11 | |
