PROCESS FIELD BUS

Description

Application

PROcess FIeld BUS is a standard for fieldbus communication in automation technology.
PROcess FIeld BUS links controller or control systems with decentralized field devices (sensors and actuators) via a single bus cable on
the field level. It also enables consistent data exchange with higher ranking communication systems. Consistency of PROcess FIeld
BUS is enabled by utilizing a single, standardized, application-independent communication protocol (named PROcess FIeld BUS DP),
which, without any difference, supports fieldbus solutions both in factory and process automation as well as in motion control and
safety-related tasks.
To ensure correct interaction between the numerous devices of an automation solution, the basic device functions and services must
match in regard to communication, functionality and industry sector solutions. This uniformity is achieved by means of “application
profiles” which refer to device families or special industry sector requirements, e.g. process automation (PA Devices), Motion Control
(PROFIdrive) or integration of HART devices.
PROcess FIeld BUS DP is in the central position and carries communication data between a controller and field devices, preferably in
Factory Automation (FA). PROcess FIeld BUS PA string is connected through a coupler or linking device to enable typical process
automation (PA) applications, e.g. in a hazardous environments. The controller is connected to PROcess FIeld NET as system bus and
interface to MES and ERP levels. PA segments can also be connected directly to PROcess FIeld NET using proxy technology.

Technical Data

Standard: Adapted to DIN 19245 & EN 50170
Operating Voltage: 250V (not for power installation)
Insulation Resistance : 5000 G x cm
Temperature Range: Flexing 12 x cable ø Fixed 6 x cable ø
Minimum Bending Radius: Flexing 12 x cable ø. Fixed installation 6 x cable ø
Test Voltage: 1500V
Flame Retardant: Complies ti IEC 60332-1-2

Cable Design Parameters

Variants	Size	Configuration	Construction	Application	Sheath Colour	Approx. Cable Dia. (mm)
Li2Y(St)CYv (TP)	02Y(St) CY DP	22 AWG x 1PR (0.32 Sq. mm) 1/0.64 mm	ABC solid / Foam PE / PETP / AL. Mylar / ATC Braid 65% / PVC Outer sheath	Fixed installation, indoor usage	Violet	8.0
02Y(St) C11Y DP	22 AWG x 1PR (0.32 Sq. mm) 1/0.64 mm	ABC solid / Foam PE / PETP / AL. Mylar / ATC Braid 65% / PUR Outer sheath	Fixed installation, Industrial Area	Black	8.0
02Y(St)CY DP Armoured	22 AWG x 1PR (0.32 Sq. mm) 1/0.64 mm	ABC solid / Foam PE / PETP / AL. Mylar / ATC Braid 65% / PVC Inner sheath / GI armour wires / PVC Outer sheath	Direct Burial	Black (Outer) Violet (Inner)	13.0
PROcess FIeld BUS PA 02Y(St)CY PA Solid	18 AWG x 1PR (0.8 Sq. mm) 1/1.02 mm (1/18 AWG)	ABC solid / Foam PE / PETP / AL. Mylar / ATC Braid 65% / PVC Outer sheath	Fixed installation, indoor usage	Blue	9.2
02Y(St)CY PA Armoured	18 AWG x 1PR (0.8 Sq. mm) 1/1.02 mm (1/18 AWG)	ABC solid / Foam PE / PETP / AL. Mylar / ATC Braid 65% / PVC Inner sheath / GI armour wires / PVC Outer sheath	Direct Burial	Black (Outer) Blue (Inner)	14.0

Electrical Parameters

PROcess Fleld BUS DP

Conductor Resistance (Loop) at 20°C: 110 /km (Max.)
Mutual Capacitance: 35 nf/km (Max.)
Inductance: 0.65 mH/km (Nom.)

PROcess FIeld BUS PA

Conductor Resistance (Loop) at 20°C: 44 /km (Max.)
Mutual Capacitance : 55 nf/km (Max.)
Characteristic Impedance @ 31.25 kHz: 100 ± 15
Attenuation @ 39 Khz: ≤ 3 dB/km
Inductance: 0.65 mH/km (Nom.)

Frequency	Characteristic Impedance (Ω)	Attenuation (dB/100m)
9.6 kHz	270 ± 27	≤ 0.25
38.4 kHz	185 ± 18.5	≤ 0.40
4 MHz	150 ± 15	≤ 2.2
16 MHz	150 ± 15	≤ 4.2