Features :- HT - 60 Busbar Puncher

• Busbar puncher (HT-60) comes with four die’s,(10.5 / 13.8 / 17.5 & 20.5) suitable for punching copper and aluminium busbar with 10mm.thickness, the tool provides accurate and faster punching for desired hole-size. The tool has throat depth of 80-85mm..
• This tool gives a cleaner punch as compared to hand drills which is more time consuming and spreads scrap(copper dust). The tool has an output force of 31 tons. with a total weight of 16kg.approx. The tool can be attached to HT – 25AS for faster production.

Capacity :-

• HT 60 with accessories die : 3/8"(10.5mm) 1/2"(13.5mm), 5/8" (17.5mm), 3/4"(20.5mm) 4 set. Powerful perforation up to 10mm thick.
• HT 60 powerful perforation up to 10mm thick
• Used as a portable punching unit or mount it for production set - ups.
• Standard Accessories: Punch & Die - 4 sets 3/8" (10.5mm), 1/2"(13.5mm), 5/8"(17.5mm), 3/4"(20.5mm)

Features :- HT - 150D Busbar Bender

• Busbar bender is suitable for bending copper and aluminium busbars of 10mm. thickness and 150mm.width.The maximum bending angle is 90 degree. The tool has an output force of 6 tons. And weight is 15kg.approx.

Features :- HT - 200 Busbar Cutter

• Busbar cutter suitable for cutting copper and aluminium busbars of 10mm.thickness and 150-200mm.width.
• The tool provides faster cutting speed without any scrap, cutting surface is smooth and without distortion. The tool has an output force of 20 tons. And the weight is 32kg.approx.

Features :- HT-25 AS Electric Power Pack

• electric power pack comes with 2 meter long hose pipe with pressure capacity of 10,000 psi. The hose pipe is coupled with PT3/ 8 inches thread which can be easily fitted to busbar tools and angle cutters and other hydraulic crimping and cutting tools.
• The tool has an oil reservoir capacity of 4000cc.using hydraulic oil (R 32).The tool works on 220V AC, single phase, 1HP and 12000RPM motor. The weight is 15kg.approx.

Special Features :-

• 220 volt, 50/60 cycle universal motor operates at voltage as 110 volts
• 3/8 NPTF return to tank port.
• High pressure hose 2M

Features :- CC 104 I & II

• Hydraulic punching tool for Mild Steel Plate and plate with a hole capacity of minimum 16mm and maximum 200mm (select the Die set according to the required Hole size).
• Suitable for punching into switchboard control panels & others. The punching tool can be operated with Hand Pump (HT-700-2A) or HT - 25AS(Electric Pump) for faster Production.
• Round Dies available: 1/2" (12.7mm) , 3/4"(19.05mm), 1"(25.4mm), 1 1/4"(31.75mm), 1 1/2" (38.1mm), 2" (50.8mm), 2 1/2" (63.5mm), 3" (76.2mm), 4"(101.6mm)
• Square Dies option: 92 X 92, 68 X 68 (Customised Dies available upon request)

Features :- HT - 110 Angle Cutter

• Angle cutter is suitable for cutting 100mm.width and 10mm.thick angles suitable for electrical power transmission and distribution, high voltage towers, bridges and other factory shed, the tool provides faster cutting speed without any scrap and gives smoother surface.The tool has an output force of 30 tons. And the weight is 60kg.

Features :- HT-41 SS Channel Cutter

• Height - 41mm / 25mm
• Width - 41mm
• Thickness - 2mm.(max.)