Features :- HT - 400 B HAND HYDRAULIC CRIMPING TOOL

• Hand hydraulic crimping tool (concealed) for crimping non insulated terminals / Lugs both light and heavy duty.
• The Tool has 17 tons output & weighs 14 kgs, head 9.5kgs. Available range from 16 MM2 to 400 MM2 giving hexagonal crimping shape.
• The tool is provided with nine sets of hexagonal dies as per DIN / JIS standards - 16 - 25, 35, 50 - 70, 95, 120, 150, 185 - 240, 300 and 400 SQ MM ( 9 sets of hexagonal dies ) The entire tool is set in a easy transportable acrylic carrying case.
• The tool has automatic cutoff system for perfect crimping which avoids excessive over crimping of joints. Easy and instant pressure releasing system. Head sleek to accommodate entry of cable at remote working areas.

Features :- HT - 240 (Hydraulic)

• Heavy duty Hydraulic crimping tool suitable for non-insulated lugs & terminal from 16mm2-240 mm2(Din standard).
• The tool gives Hexagonal compression after crimping with a force of 10 TON, weighing approximately 8 kg.
• The tool comes with a sets of Hexagonal dies for a 100% oxygen free crimp with Pressure from 6 sides.

Features :- HT - 150 (Hydraulic)

• Hydraulic crimping tool suitable for non-insulated lugs & terminals from 16mm2 – 185 mm2 (DIN standard).
• The tool gives a point compression after crimping, it has an output of 8 Tons (Force) weighing 6 kg. the Die’s are rotating.

Special Features :-

• Maximum pressure output is 8 tons.
• Hand hydraulic compression tool. Its designed pump connected with compression tool. The hand hydraulic pump comes equipped with a handle coupling which allows direct connection of the tool hand.
• Easy operation of pump with automatic cut - off, klick sound on completion of crimping job. Thus perfect crimped point achieved - "No over or under crimping".
• Tool available with set or standard dies. Point "D" type Male- 16-70, 70-185 Female - 1 pcs 16-25, 35, 50-70, 95, 120, 150, 185 marking as per DIN & JIS standards.
• Applicable range DIN - 185mm, JIS - 150 & AWG - 300
• Total weight - 7 kg, head - 5.5 kg
• Easy frame opening or crimping head to accomodate the job.
• Simple ON/OFF rotating knob for instant piston operation.
• Whole unit accomodated in easy to handle acrylic carrying case.
• Tool handles provided with suitable PVC grip for easy operation.
• Convenient for each work and other remote areas where no electricity is available.

Features :- HT-700-2A Hand Operated Hydraulic Pump

• Hand operated Hydraulic crimping pump 10000 psi ( 700 kgf/cm) Operation with two speed output provided with high pressure hose 2 meters long. 3/8" NPTF return to tank port. Aluminum hand valve. Super cycle oil R32, preservation; change engine oil each half year, ready to install oil pressure gauge to test the working pressure. Weight 17 Kgs, Reservoir capacity 2100 cc,
• Dimension of hand operated pump
  L x W x H (mm) 590 x 120 x 150. 10000 psi ( kg/cm2).

Special Features :-

• 10000 PSI ( 700 KG f /cm) operation.
• Two -speed operation.
• High pressure hose 2M.
• 3/8 NPTF return to tank port.

Features :- HT - 400 B (HEAD) Hydraulic Compression Head

• Compression head HT 400 B consists of front open frame for accommodating the hexagonal dies and the crimping job at remote places.
• The head can be connected with a hand or a foot pump. The total output is 17 TONS, Weight 4 kgs ( Total weight of head + dies + carrying case = 8 kgs).
• The standard hexagonal dies as per DIN standard range from 16 mm2 to 400 mm2.(Nine sets of dies) .
• The nine female dies are 16-25, 35,50-70,95, 120,150,185-240, 300 and 400 mm2. The whole unit is provided with easy transportable acrylic carrying case.
• Range: 16 mm2 400 mm2.

Features :- HT-800-1 Foot Operated Pump

• Foot operated crimping pump 10000 psi ( 700 kgf/cm) operation with two speed output provided with high pressure hose 2 metres long 3/8 inches NPTF return to tank port aluminium hand valve supercycle oil R32 , preservation; change engine oil each half year, ready to install oil pressure gauge to test the working pressure. Weight 14 Kgs , Reservoir capacity 400 cc,
• Dimension of foot operated pump
  L X W X H (mm) 250 x 140 x 250 (10000 psi (kg/cm2)).

Special Features :-

• 10000 PSI ( 700 KG f /cm) operation.
• Two -speed operation.
• High pressure hose 2M.
• 3/8 NPTF return to tank port.

Features :- HT-4070 Hydraulic Crimping Tool

• Heavy duty hydraulic crimping tools, Suitable for crimping copper Lugs & terminals from 6mm2-70mm2.With rotating head facility.The tool gives an output of 5 tons. and weight 1.6 kgs approx.
• Crimping Range: 6mm2-70mm2.
• Size: 305 X 100 X 55mm

Features :- HT-4300 Hydraulic Crimping Tool

• Hydraulic crimping tool using advance technology & design which provides full proof crimping with an applied crimp force of 6 tons.
• The head can be rotated 180 degrees with built in safety valve, & anti-slip handles, giving hexagon crimp shape.
• Crimping Range: 10-240mm2
• Lenght: 380mm

Features :- HT 3240 F / HT-3300 F

• Heavy Duty Hydraulic crimping Tool suitable for crimping copper Lugs & Terminals upto 240 mm2 / 300 mm2.
• The Tool has two speed action system, first by fast advancing speed for rapid approach of the Die's to the Lugs & second slower & powerful Movement for perfect crimping.The Tool has an output force of 10 Ton. Weight 4.1 kgs.

Crimping Range :-

• HT 3240 :25 - 240 mm2
• HT 3300 :16 - 300 mm2

Features :- HT-630B/1000B Crimping Head

• Heavy Duty crimping head for crimping LUGS & Terminal used for HT Cables & (10kv - 500kva) installations.
• The tool has a crimp force of 30 Tons (HT 630B) & 40 Tons(HT 1000) with Hexagon crimp shape.
• The tool can be operated with hand hydraulic Pump (HT 700-2A) or HT-25AS (electric Pump), comes with one Die, extra Dies to be ordered separately.
• HT - 630B: upto 630mm2 Weight - 19kg.
• HT - 1000: upto 1000mm2 Weight - 28kg.

Features :- HT-4240 Hydraulic Crimping Tool

• Heavy duty hydraulic crimping tool,suitable for crimping copper Lugs & terminals from 10mm2-240mm2. With rotating head facility. The tool gives an output of 10 tons. and weighs 4.8 kgs.approx.
• Crimping Range: 10mm2-240mm2.
• Lenght: 540mm

Features :- HT-4400 Hydraulic Crimping Tool

• Heavy duty hydraulic crimping tool,suitable for crimping copper Lugs & terminals from 16mm2-400mm2. With 360 degree rotating head facility. The tool gives an output of 12 tons and weighs 6.5 kgs.approx., comes with interchangeable hexagonal die-set.
• Crimping Range: 16mm2-400mm2.
• Lenght: 560mm

Features :- HT- 3510 Hydraulic Crimping Tool

• Range: 50-400mm2
• Output Force: 13 ton
• Weight: 6.5 kgs
• Size: 650(L) X 150(H) X 70(W) mm

Features :- HT - 3003 Hydraulic Crimping Tool

• Range: 16-300mm2
• Output Force: 13 ton
• Weight: 4 kgs
• Size: 520(L) X 110(H) X 80(W) mm

Features :- DL - 4008 H Hydraulic Crimping Head

• Range: 25-400mm2
• Output Force: 6 ton
• Weight: 3 kgs
• Length: 280mm

Features :- DL - 4008 Hydraulic Crimping Head

• Range: 25-400mm2
• Output Force: 6 ton
• Weight: 5.2 kgs
• Length: 580mm